DESIGN

1- Process & Utility Piping Design

2- Equipment Layout and 3D Modeling

3- Structural and Foundation Design

4- Fire Protection System Design

5- HVAC System Design

6- Electrical and Instrumentation Design

7- Isometric Drawing and Spooling

8- Feasibility and Engineering Studies

CONSTRUCTION

1- Process & Utility Piping Design
Design of process and utility piping systems in compliance with ASME, API, and project-specific standards, including material selection, stress analysis, and routing.

2- Equipment Layout and 3D Modeling
Development of general arrangements, equipment placement, and 3D plant modeling to optimize space usage, access, and maintenance.

3- Structural and Foundation Design
Design of pipe racks, platforms, and reinforced concrete foundations using international codes such as AISC and Eurocode.

4- Fire Protection System Design
Design of fire detection and suppression systems in compliance with NFPA standards, including hydraulic calculations and layout drawings.

5- HVAC System Design
Design and layout of heating, ventilation, and air conditioning systems based on thermal load calculations and air distribution requirements.

6- Electrical and Instrumentation Design
Complete design solutions for LV/MV power, grounding, lighting, and automation systems, including P&IDs and loop diagrams.

7- Isometric Drawing and Spooling
Preparation of detailed isometric drawings, material take-off (MTO), and spool drawings to streamline fabrication, welding, and site installation processes.

8- Feasibility and Engineering Studies
Technical feasibility assessments and conceptual design packages including preliminary drawings, specifications, and budget estimates.

CIVIL WORKS

1- Reinforced Concrete Foundations and Platforms

2- Ground Improvement and Excavation-Fill Works

3- Drainage and Stormwater Systems

4- Roadworks, Curbs, and Pavement Construction

5- Cable Trenches and Duct Banks

6- Sheet Pile Applications

7- Prefabricated Structure Installation

1- Reinforced Concrete Foundations and Platforms
On-site structural solutions including equipment foundations, MCC rooms, and pump station buildings.

2- Ground Improvement and Earthworks
Formation of structural infrastructure through stabilization, excavation, drainage, filling, grading, and compaction processes.

3- Drainage and Stormwater Systems
Site-wide water management through PVC/HDPE pipelines, manholes, and discharge systems.

4- Roads, Curbs, and Pavement Works
Internal access roads and surface applications including concrete and interlocking paving stones.

5- Cable Trenches, Shaft Construction, and Landscaping
Underground duct infrastructure for electrical, instrumentation, and communication lines, along with site landscaping applications.

6- Sheet Pile Applications
Installation of steel retaining systems to ensure excavation safety and soil stability.

7- Prefabricated Structure Installation
Turnkey installation of prefabricated buildings and modular structures.

ELECTRICAL WORKS

1- Medium and Low Voltage Systems

2- Lighting Systems

3- Grounding and Lightning Protection Systems

4- MCC (Motor Control Center) and Automation Systems

5- Cable Tray Installation and Instrument Cabling

TEST & COMMISSIONING

1- Hydrostatic & Pneumatic Testing

2- Electrical Testing & Commissioning

3- Instrumentation Loop Testing

4- Functional Testing & System Integration

5- Pre-Commissioning and Commissioning Support

6- Performance Verification & Handover Documentation

1- Medium and Low Voltage Systems
Installation, cabling, testing, and commissioning of MV/LV panels; development of power supply and distribution infrastructures.

2- Lighting Systems
Design and installation of indoor/outdoor, emergency, high-mast, and automated lighting systems.

3- Grounding and Lightning Protection Systems
Installation, testing, and certification of lightning arrestors, grounding lines, and busbars for safety and compliance.

4- MCC and Automation Systems
Motor Control Centers, control panels, PLC/DCS software integrations, and process automation solutions.

5- Cable Tray Installation and Instrument Cabling
Field-wide cabling between instruments and control rooms, including signal testing and commissioning.

1- Hydrostatic & Pneumatic Testing
Pressure testing of piping systems and tanks to verify integrity and compliance with standards such as ASME B31.3, API 650, and project specifications.

2- Electrical Testing & Commissioning
Testing of MV/LV panels, circuit breakers, transformers, and grounding systems for safety, performance, and continuity.

3- Instrumentation Loop Testing
Verification of signal transmission from field instruments to control systems, including calibration, configuration, and response checks.

4- Functional Testing & System Integration
Validation of system functionality through simulation and live testing scenarios, ensuring interconnectivity and automation logic performance.

5- Pre-Commissioning and Commissioning Support
Flushing, cleaning, blowing, drying, and energization activities across mechanical, electrical, and instrumentation systems.

6- Performance Verification & Handover Documentation
Final performance checks, punch list clearance, and submission of test reports, red-marked drawings, and O&M manuals for project handover.

MECHANICAL WORKS

1- Offshore & Onshore Mechanical Works

2- Storage Tanks

3- Pipeline & Station Piping Works

4- Fire Fighting Works

5- Equipment Installation

6- Equipments and Instruments Calibration Works

7- Design, Project Control Works

8- Marine Operations and Industrial Diving Services

9- Mechanical System Special Applications

1- Offshore Mechanical Works
Complete mechanical services on oil and gas platforms, including piping, equipment installation, structural steel assembly, and process line construction. We deliver corrosion-resistant, marine-grade solutions compliant with API, ASME, and DNV standards to ensure maximum safety and performance in offshore environments.

2- Storage Tanks
Turnkey fabrication and installation of carbon steel or stainless steel tanks in accordance with API 650 standards.

3- Pipeline and Station Piping Works
Turnkey services for process and utility pipelines in industrial plants, refineries, and fuel storage terminals, covering design, fabrication, installation, and commissioning.

4- Fire Fighting Systems
Design, installation, commissioning, and post-commissioning maintenance of foam and gas suppression systems, as well as hydrant networks, in accordance with NFPA standards.

5- Equipment Installation
Heavy lifting, positioning, alignment, and commissioning of industrial equipment in compliance with lifting plans and site safety procedures.

6- Equipment and Instrument Calibration
Calibration, adjustment, and certification of pressure, temperature, flow, level, and other field instruments. Services are provided with full traceability and official calibration documentation.

7- Design, Engineering, and Project Control
Preparation and management of P&IDs, GPPs, GADs, isometrics, spool drawings, as-built documentation, maintenance plans, procedures, and documentation systems with integrated tracking and alert functions for preventive maintenance.

8- Marine Operations and Industrial Diving Services
Underwater piping, ROV inspections, cathodic protection installation, concrete mattress placement, backfilling, harbor dredging, pontoon and support vessel rental services.

9- Special Mechanical Applications
Torqueing, hydrostatic and pneumatic testing, pipeline pigging and drying, nitrogen purging, hot and cold cutting, instrument tubing installation, pre-commissioning, industrial painting, pipeline/equipment/tank insulation, turnover and handover operations, commissioning and decommissioning services, HVAC works, and horizontal directional drilling (HDD).